craigslist | tools in york, PA

MUST SELL

2008-11-18T11:02:13-05:00

10"COMPOUND MITER SAW ON STAND, 7 1/2 BAND SAW ON STAND,1 1/2HP ROUTER AND BIT MOUNTED ON STAND. PLEASE CALL717 9278079 OR JLFJR48@COMCAST.NET THANKS

Lockpick Set (Hanover Pa) $250

2008-11-18T09:33:29-05:00

Up for sale I have a lockpick set..It is complete with 30 picks,rakes,and tension wrnches.I am willing to sell this for $250.00 FIRM...You have to be in the field of locksmithing to obtain these tools. i was in the field,but now im not.... please email me if you are intrested.ryerye923@gmail.com...can pick up at anytime...i work daytime,so i should be back by $4:00-5:00..Again I am very frim on this Sale!!! Thanx for checking this out...i will upload a picture as soon as my phone is charged!

NIP...Black & Decker AutoTape (Spring Grove ) $8

2008-11-18T02:13:56-05:00

Brand new in the pack. Black & Decker 25ft AutoTape

Asking $8.00

Contact if interested

Porter Cable 4500 Watt Generator (Abbottstown, PA) $725

2008-11-18T01:23:43-05:00

Porter Cable 4500 Watt Generator, Model H450IS-W, 9hp Honda GX270 OHV Engine, Cirduit breaker protection, Idle Control, Hour Meter, Lift kit, Portability kit with 10" Pneumatic Tires, 120/240 AC, 12V-DC, 2 Twist Lock Plugs, Low hours, 7-gallon fuel tank for up to 13.4 hours of run time at half load; 8.7 hours at full load, Excellent condition and runs great, Save hundreds over new price, call 717.259.6045 for more details.

Makita Circular Saw 8 1/4" (Felton area) $45

2008-11-17T21:50:13-05:00

Used Makita 210 mm (8 1/4" dia.) Circular saw, Model 5008NB,115V AC/DC, 13 amp., 5200 RPM. Max. Depth of Cut at 90 Deg. is 2 7/8", at 45 Deg. is 2 1/4". Good Condition, Carbide blade, I install a New Switch, Bushes look Good, Runs Fine. Includes Instruction Manual and Parts Breakdown.

Painters Wooden Slide Plank 8 feet expandable to 16 feet (York, PA) $25

2008-11-17T20:07:21-05:00

Painters wooden slide plank. 8 feet and expands to 16 feet. Great condition.

DeWALT 4 1/2 ANGLE GRINDER (NEW FREEDOM) $75

2008-11-17T19:14:01-05:00

DeWalt Grinder,11,000/min(rpm)120v ac/dc (used) but in great condition. Very little scratches...Serious inquiries only, price is $75.00 FIRM. Contact me at smileys83@yahoo.com

Hitachi Jack Hammer/Demo Hammer (Wrightsville) $700

2008-11-17T17:55:12-05:00

This is a used Jack hamer, works great. Lower end recently rebuilt by Gap Power Tools. Asking $700 OBO. Please call Chad 781-7506

Bosch Brute Jack Hammer/Demo Hammer (Wrightsville) $200

2008-11-17T17:52:47-05:00

This is a used jack hammer. Needs armature to be in working condition.
Asking $200 OBO. Call Chad 781-7506

Torch Bottles Oxy-acet 150$ / pc (York Pa) $150

2008-11-17T17:00:02-05:00

Oxygen and acetylene cylinders , the oxygen bottle is full and the acetylene bottle is about empty but has few good cuts left in it . I own these and have documents from common wealth weld supply to tranfer these bottle to whomever purchase's them . You would own the rights to 2 bottle , when they need refilled you take them in and the swap you for full bottles . Product is about 20$ . To buy these bottles right at the weld supply you will pay 200$+ .
Also have victor performer torch set for 125$ comes with regs, rose bud , cutting , and welding tip .
Bottles - 150$ a peace or $300 for both
Torch set 125$ OBO
Call Dan 717-318-7597 leave message if i don't answer .

GUARDIAN 16 kW Automatic Standby Generator (Yoe, PA) $3789

2008-11-17T13:52:12-05:00

New in box GUARDIAN 16kW Automatic Standby Generator.

GENERATOR SOLD ONLY WITH NEW INSTALLATION. Only (1) instock to sell, make your appointment quick!

Call today! 717-246-2778 or visit us on the web at www.deer-creek-electric.com

Everything Included:
� QuietSource Home Standby Generator
� 100-Amp Automatic Transfer Switch w/ 16 Circuits
� Outoor Connection Box
� 30' Pre-Wired Conduit From Transfer Switch To Generator
� 2' Pre-Wired Conduit From Transfer Switch To Main Panel
� 1' Flex Fuel Line
� Mounting Pad
� Installation Guide

New Whisper Test:
� Ultra-quiet operation during weekly exercises
� Sound output reduced to 59 decibels

Indefinite Power Supply:
� Runs on LP or Natural Gas - no gas cans to fill, store and refill

Continuous Power:
� Generates electricity until utility power is restored

Model:

Model Number: 5243

Manufacturer: Guardian

Made in USA: Yes

Engine:

Brand: Generac

HP/CC: 30 HP/992 cc

Engine RPM: 3600 RPM

Low Oil Alert: Yes

Product Specs:

Voltage 120/240 Single-Phase

Frequency: 60 Hertz

Cooling System Air Cooled

Fuel Type LP/Natural Gas

NG Power Capacity 15,000 Watts

LP Power Capacity 16,000 Watts

NG Fuel Consumption 245 ft�/hr

LP Fuel Consumption 2.51 gallons/hr

Continuous Amps: 133/66 (120/240V 1�)

Max Amps: 133/66 (120/240V 1�)

Decibel Rating @ 7m: 71.5 db(A)

A/C Ton Rating 5-Tons

Enclosure Steel

Mounting Pad Composite (Included)

Transfer Switch: Automatic (Included)

Transfer Switch Amperage: 100-Amps

Transfer Switch Style Pre-Wired (16-Circuit)

Transfer Switch Circuits: 5 - 15A/120V
5 - 20A/120V
1 - 20A/240V
1 - 50A/240V
1 - 40A/240V

Max Circuits: 16

Overview:

UL Listed Yes

Weight: 445 Lbs. (201.85 kilograms)

Dimensions: 48L x 24W x 28.25H
(121.92 x 60.96 x 71.76 cm)

GUARDIAN ELITE 18kW Automatic Standby Generator (Yoe, PA) $5000

2008-11-17T13:51:06-05:00

New in box GUARDIAN ELITE 18kW Automatic Standby Generator.

GENERATOR SOLD ONLY WITH NEW INSTALLATION. Only (1) instock to sell, make your appointment quick!

Call today! 717-246-2778 or visit us on the web at www.deer-creek-electric.com

Technical Details:

This model provides up to whole house protection with the 200 amp service disconnect automatic transfer switch included.
Runs on LP gas or natural gas, providing continuous fuel and reduced emissions.
The electronic governor maintains steady speed and eliminates voltage drop when loads are applied.
Features corrosion resistant gray aluminum enclosures which will never rust!
UL 2200 listing ensures the generator meets local building code approval, safety and certified kw power ratings.

From the Manufacturer:

The Guardian Elite model #5416 is the quietest and most powerful air-cooled model of it's size on the market today. This 18kW has the Whisper-Test feature which allows it to run 50% quieter during weekly exercising. It also has a 2 year oil change interval.

Product Description:

Guardian QuietSource is the most powerful, automatic air-cooled generator on the market and includes a free transfer switch! QuietSource offers more standby protection than the Guardian Plus and includes the exclusive Whisper-Test feature for ultra-quiet operation during the generator's weekly self-testing cycle. Strongest engine in the industry eliminates the need for expensive load management systems. Powerful Overhead Valve Industrial (OHVI) engine features full pressure lubrication and was specifically designed for generator demands. U.S.A. Engine: 992cc OHVI Generac, Rated Watts LP (kW): 18, Rated Watts NG (kW): 16, Volts: 120/240, Amps: 133.3/66.6, Start Type: Automatic, Phase: 1, Noise Level (dB): 70, Transfer Switch: Yes, Fuel Type: Liquid Propane or Natural Gas, Enclosure: Yes, Corrosion-resistant aluminum, Battery Required: Yes, Battery Included: No, Auto Shutdown: Low Oil, Low Pressure, Overspeed, Overcrank, High Temperature, UL Listed: Yes, Dimensions L x W x H (in.): 48 x 24 x 28 1/4

Tool Box for pick-up (Adams County)

2008-11-17T12:37:28-05:00

Have 2 boxes one is a Kobalt 20w x 20 h full size pick 125.00 or b/o and the other is a WeatherGuard 27w x 18h 250.00 firm it's a big one for full size pick-up call 677-7789

Acetylene Torch and Tank (Adams County) $100

2008-11-17T12:35:14-05:00

any questions call 677-7789

Paint roller Border and Accent kit (West York) $5

2008-11-17T11:24:39-05:00

New never used Border and Accent kit....$5

Vacuum Pump (Littlestown, Pa) $180

2008-11-17T10:10:41-05:00

Robinair Vacumaster Vacuum Pump, Model 15400 Great shape, used only a few times . Sells New $303.00

electrode holders (thomasville)

2008-11-17T08:19:02-05:00

tweco #A-14 350 amp new in box-15.00
KD-300-AMP new in box -10.00
GC 500AMP ground clamp -15.00
KD-300-amp new in box [but has tip of handle broke off from shipping]-7.00

NEW GRADE #5 bolts (thomasville) $150

2008-11-17T07:55:44-05:00

all are standard coarse thread-made in U.S.A or Canada -grade#5 new -zinc
5/16 x 3/4 100
5/16 x 1" 100
5/16 x 1 1/4 100

3/8 x 1 1/2 100
3/8 x 2 100
3/8 2 1/2 50

1/2 x 1 1/2 50
1/2 x 2 1/2 25
1/2 x 4 1/2 25
1/2 x 5 1/2 25

5/8 x 1 25
5/8 x 1 1/4 25
5/8 x 1 3/4 25
5/8 x 2 25

Craftsman Drill Press (York City) $25

2008-11-17T04:33:14-05:00

Universal drill mount with nylon clamp accepts most drills. Horizontal mount converts drill for grinding, buffing, sanding and flex shaft operations. 2-1/2in. travel adjusts in 1/16 in. increments.

Fully height adjustable with heavy steel stand pipe for true in-line drilling. Large center access hole allows Workpiece to be drilled through. Clamp mount slots provides mounting of hold down clamps and vises. V-groove in heavy duty base helps center round work pieces.

Comes with manual, used it for one project

4000 watt generator (delta pa) $350

2008-11-16T20:11:37-05:00

up for grabs is a coleman powermate 4000 watt gen, its 3 years old, well maintained, used about 5 times, runs great!!!!!!!!!!! starts everytime,any questions feel free to call or ask. 717-862-9708 thanks

torch set (delta pa) $75

2008-11-16T20:06:18-05:00

torch set that works good, if you have any questions feel free to call 717-862-9708, thanks

ridgid wood plainer (delta pa) $400

2008-11-16T20:02:42-05:00

the plainer is new, used once, it has a stand that goes with it, see pics if you have any questions feel free to call 717-862-9708, thanks

4foot ladder $15

2008-11-16T19:55:15-05:00

4foot lader wood call(717)428-1969

ladder 6 foot $15

2008-11-16T19:49:18-05:00

ladder 6foot wood call (717)428-1969

leef blower b&d $15

2008-11-16T19:30:27-05:00

electric leef blower b&d call(717)428-1969

Lincoln 350- Pro Invertec Welder (Seven Valleys ) $2500

2008-11-16T18:54:58-05:00

Lincoln 350-Pro Invertec Welder with Cobramatic push-pull mig gun, 15ft lead air cooled. Bought in 2000 from Dressel Weld supply for $6000.00 for my business Ram's Head Welding Co. Inc,. The welder was used for alum welding only. The welder and mig gun were bought for a specific job, it ran (7) 16lb spools of .030 er4043 alum wire. Will run 440 volts or 220 volts was set up for 220 volts. More detailed info can be found at www.lincolnelectric.com. Welder is capable of mig, tig, stick, air arc, and flux core it is a very versatile machine.

Phone#717-428-0843

Craftsman Radial Arm Saw (Old but works) (York) $50

2008-11-16T15:00:07-05:00

Craftsman Radial 100 Saw, Tabletop, Missing wrench for changing blade but can use standard wrench, Works, Price is firm.

Wheelbarrow (Thomasville) $15

2008-11-16T14:26:14-05:00

Whelbarrow in good condition.

Craftsman Table Saws (Red Lion/York) $200

2008-11-16T09:34:30-05:00

10-in Band saw 1/3 hp /extra blades
8" Table top saw direct drive
18" Scroll saw /extra blades
2 saw tables
Hand held Router
Glue gun with sticks
Drill stand

MAKITA SAWZALL Variable Speed Reciprocating Saw (Wrightsville) $60

2008-11-16T09:23:04-05:00

I have for sale a MAKITA SAWZALL Variable Speed Reciprocating Saw. It is in great condition. Comes with plastic carrying case. Any questions just email.

Lennox tube cutters (york) $35

2008-11-16T08:51:38-05:00

Brand New
1/8 to 1 3/8 tube cutters from lennox

malco turbo shears (york) $50

2008-11-16T08:47:33-05:00

tshd turbo shear
clamps onto your drill to make cordless power shears
these are new in the package, if you check, this is price you cant beat.

Generator Craftsman 2500 w - GREAT CONDITION (New Cumberland) $175

2008-11-16T04:33:55-05:00

Craftsman portable generator 2500 watt with Honda 5 hp ohc engine very. Low
hours. Please call 717-350-0715

Black & Decker Leaf Hogg Blower Vacuum System 230MPH (Downtown Hanover) $60

2008-11-15T21:23:18-05:00

Nice Black & Decker Leaf Hogg Blower Vacuum Hand held 110 plug in. Bag in good shape no tears or cuts, lite weight unit.
230MPH 2 Speed blower/vacuum
$60 CASH PICKUP ONLY!
Brando80@usa.com
Clean up those leaf with ease!

Black and Decker 16" Hedge Trimmer (McSherrystown, PA) $20

2008-11-15T20:38:52-05:00

Black and Decker 16" Hedge Trimmer, model #TR1600. Only used a few times, in good condition. Only problem is I lost the power cord. If I find it, it's yours, but as of now, I don't have it. Should use a regular extension cord as far as I know.

Any questions, let me know!

$20 cash

diagnostic scan tool (york) $200

2008-11-15T19:42:15-05:00

innova digital can OBD 1&2 scan tool, excellent condition includes OBD1 connectors ford,chrysler,GM,and lexus.It also includes OBD2 connector for 1996 and newer vehicles. I also have the owners manual and software cd wich is OBD-PC link and reference files for your computer. if you are interested call 717-801-9776 if no answer leave a message.

snowblower 8hp TORO 32 inch path runs good (red lion) $200

2008-11-15T19:29:34-05:00

this is an all metal, simple sturdy snow blower. i put new points in it and redid the carb,i just changed the oil-it runs great. this has a briggs & stratton motor,the whole machine is in decent shape,good tires,the orig paint is still on the auger, it is a wide path machine, good for a larger area.this is about 10 times better made than a new one from walmart, ill be glad to let you hear it run, contact me with questions. thanks Ron 246-3713

i can deliver this if you need it done. thanks

Macsimizer tool Box (gettysburg)

2008-11-15T19:22:09-05:00

Macsimizer tool Box Snap-On tool Box Snap-ONBattery charger Lots of new tools for more imfo call 717 334 3081 717 752 0821

Macsimizer tool chest (gettysburg)

2008-11-15T19:10:55-05:00

Macsimizer tool chest Snap-On tool box lots of new tools battery charger for more imfo call 717 334 3081 717 752 0821

Wells Cargo Enclosed Utility Trailer (Jefferson PA)

2008-11-15T18:57:36-05:00

1979 Wells Cargo enclosed utility trailer for sale.

Good Tires, electric inside, alarm system, ramp door in rear, side door.
Asking $1000.00 paid $1700.00 3 years ago. Clear title, presently tagged.
Call 717-577-1786 only only serious inquiries please!

Kennedy Machinist Tool Chest - SET (West York) $150

2008-11-15T17:23:40-05:00

Great Chrismas gift! Includes 4 keys (2 each)

set of ridgid pipe threading dies and handles (lewisberry) $250

2008-11-15T16:35:50-05:00

What i have is nine threadind dies and five handles very good buy if you can use them all in good shape.

Lot of starret hole saws with abors (lewisberry) $75

2008-11-15T16:25:57-05:00

This is a lot of starret made in the usa hole saws that are still sharpe some never used 1/2" to 3" this is a really good buy if you can use them.

SET OF RIDGID PIPE THREADING DIES AND HANDLES (LEWISBERRY) $250

2008-11-15T16:14:39-05:00

THIS SET HAS NINE DIES AND FIVE HANDLES THAT ARE IN GOOD SHAPE.

Steel Catalog Rack (Red Lion) $60

2008-11-15T11:26:25-05:00

Steel Catalog Rack
Ht 83"
Width 9'
Depth 15 1/2"
Good condition...great for a garage
$60 or make offer
call (717)246-0198

3 ladders (orrtanna)

2008-11-15T10:11:20-05:00

one wooden ladder 4foot$10.00, one wooden ladder 6 foot$10.00, one aluminum 6 foot$15.00.

Sears Craftsman 8" Direct Drive Table Saw (York) $60

2008-11-15T06:58:28-05:00

Sears Craftsman 8" Direct Drive Table Saw, runs well and in good working condition, Miter gage extension and stop supports accurate crosscutting and repetitive crosscutting. Asking price $50.0 or best offer.

1/2 HP Heavy Duty Grinder (York) $25

2008-11-15T06:51:19-05:00

Pro-Teck 1/2 HP All Ball Bearing Heavy Duty Grinder, works good and electrical condition checked out prior to selling and is in good working condition. $25.00 or Best Offer

Alto AST Sander (Dover) $900

2008-11-14T19:13:35-05:00

Alto OBS-18 DC

American Sanders Technology

Make your wood floors look like NEW for the holidays! Professional wood sander for sale. It takes all of the back breaking work out of sanding your floors. $900.00

Voltage/Frequency: 115V/60Hz
Amperage:10
Motor: 1 hp
Pad Size: 12x18 inches
Power Cable: 50' Rubber jacketed
Orbits Per Minute: 3600
Obit Diameter: 1/4 inches
Weight: 125 lbs.

Includes:
Operator's Manual
Floor Sander Bag
Floor Sander Skirt assembly

(717)683-2158

Snow Blower (Littlestown, Pa.) $300

2008-11-14T15:37:08-05:00

MTD 8Hp 24" 5 forward and 2 reverse speeds. Runs great only 4 years old.

streamlight supertac flashlight (york,pa) $65

2008-11-14T14:18:20-05:00

up for sale is a barely used streamlight super tac with every thing that came with it- good batteries, holster, flashlight is capable of a 30,000 peak candlepower at a total of 135 lumerns. the runtime on the flashlight is 3.5 hours. it comes with the instructions and everything that i bought it with. the only reason im selling it is because i need the money and im going into the navy. the price is $65.00 obo you can reach me at gotajeep@gmail.com or call john at 717-318-9909

Craftsman Band Saw, Not Working (Manchester) $40

2008-11-14T13:34:51-05:00

Hello this Craftsman band saw is not working.
I believe it to be the bottom bearing, but I am not entirely sure.
I believe the motor still works.
It has been outside for about .75 of a year.
Rust has developed on the cutting surface.

Drafting Table & Drafting Machine (Strinestown) $500

2008-11-14T01:33:32-05:00

I have a Solid Oak "4 post" style Drafting Table, with a 3' by 5' adjustable top, and 2 drawers.

Mounted on the table top is a, like new "VEMCO" brand, beam type Drafting Machine.

Over $2,000.00 invested.

Will sell separately for $300.00 each, but would prefer to sell as a unit.

I don't have a picture of the actual unit, but will include a photo of an identical table, that I coppied off GOOGLE images.

NEW McCulloch 1800-Watt Digital Generator

2008-11-13T23:58:46-05:00

New In The Box McCulloch FDD210MO 1800-Watt Digital Inverter Generator
This sells for $575 New first one with $375 gets a steal, never had gas in it or started this is brand spanking new. This is a solid heavy duty unit
Bill 717-676-1468

Technical Details
Circuit Breaker
Recoil start
5 hours running time
Low oil shutdown
3 LED amps ensures proper operation

--------------------------------------------------------------------------------

Product Description
From the Manufacturer
This is a modern generator constructed with a permenant magnet alternator and an OHC gasoline combustion engine. The engine turns the rotor outside the stator to change the magnetic flux generated into AC electricity through an inverter to DC then transfer to AC output

--------------------------------------------------------------------------------
Product Details
Product Dimensions: 21.5 x 15.5 x 22.5 inches ; 54 pounds
Shipping Weight: 66.4 pounds

engine driven welder (glen rock) $1800

2008-11-13T22:52:33-05:00

Honda ew171 welder/generator; 4000w geneator, 50-170 amp dc welder. Machine is in great working condition. Paint a bit faided. Price neg.
717-332-3878 (Jason)

Craftsman 3 HP 10" Table Saw (Felton, PA) $250

2008-11-13T20:13:07-05:00

Craftsman 3HP 10" Table Saw. Call Eric at 717-495-2551

Tone Shear Wrench S-90EZ (New Freedom PA) $500

2008-11-13T18:20:48-05:00

Tone Shear Wrench S-90EZ, used but works great, retails for over $2000.00, am only asking $500.00 OBO. If interested contact me via email above.....

craftsman 3/8-in. sq. air-drive rachet wrench (dover) $75

2008-11-13T14:25:49-05:00

top-mounted forward/reverse switch, steel drive with ball retainer for positive socket retention. square handle design for sure grip. convenient throttle lever for accurate speed control. got this with some stuff i bought a couple years ago. dont think it was ever used, has box and instructions. i think they are about $150 at sears. firm on the price.

Power probe (york) $50

2008-11-13T13:21:44-05:00

power probe 1 for testing power and grounds in autos like new .

With the press of a switch you'll have an instant hot lead or ground lead. Use the hot and ground lead simultaneously to activate components right in your hand. Instantly check components for continuity as well as identify positive, negative and open circuits without re-polarizing hook-up clips. Follow and locate shorts without wasting fuses.

Craftsman 6" Bench Grinder 1/5hp $35/OBO (Galleria Mall area)

2008-11-13T11:41:46-05:00

This is used but very little. In great shape. Selling for $35.00

Craftsman 10" Contractors Table Saw (Shiloh) $200

2008-11-12T19:37:43-05:00

Title says it all, $200

Mac Tools EM710 Digital Multimeter/tester (york) $150

2008-11-12T17:57:36-05:00

I am selling a like new, used 3 times, Mac tools Em710 Digital multimeter with
all the attachments, ohm meter, and a padded case. works great, just have no use for it. Bought brand new 1 year ago for 300.00 dollars. thanks

SafeWaze 1511-ND, Airflex Ultimate Safety Harness, Side D-Rings (Nationwide) $157

2008-11-12T17:03:20-05:00

SafeWaze 1511-ND, Airflex Ultimate Safety Harness, Side D-Rings & Fully Padded

Airflex combines ergonomic design with state-of-the-art webbing material for unparalleled performance and wearer comfort. The webbing allows air to flow through it for cooler wear, while the unique foam padding actually "forms" to the body during wear. The double-padded back design reduces pressure from D-ring and lanyard for increased wearer comfort. The double-back pad makes extended wear even more comfortable with the cushion and support of a double-padded back pad. The innovative fastening system of the quick connect buckles allows for easier doffing and donning. Saves time and increases productivity.

SafeWaze 1511-ND, Airflex Ultimate Safety Harness, Side D-Rings & Fully Padded

Double padded shoulder straps

Double padded back pad

Removable waist/tool belt

Padded, non-slip leg straps with quick connect buckles

Adjustable upper torso straps

Also Visit our complete line of harnesses!

AC Tool Supply
877-207-1244

black and decker hedge trimmers used 1 season (shrewsbury, pa) $15

2008-11-12T14:08:19-05:00

We are moving out of state to a low maintenance property and don't need these anymore. call @717-495-3886 to see it.

sturdy shovel (shrewsbury pa) $10

2008-11-12T14:05:22-05:00

We are moving to a home out of state with little lawn maintenance so we won't be needing this anymore. It was hardly used and is in great condition. Call @ 717-495-3886 day or evening to this and a few other tools.

electric power drill (shrewsbury,, pa) $10

2008-11-12T12:55:57-05:00

This is a basic power drill with electic cord, it's about 3 years old and hardly used since we normally use the cordless one when it's charged. We are moving out of state so we won't taking a lot of things in the garage. I can add pictures later.

coleman generator (thomasville) $450

2008-11-12T09:20:17-05:00

coleman 5000w generator like new low hours 1 year old

Heavy duty 1/2" impact air hammer - New (York) $30

2008-11-11T19:18:40-05:00

Power off wheel lugs, U-bolts, and transmissions.

* 250 ft. lbs. max. torque gets the job done fast
* Air requirements: 4 CFM @ 90 PSI
* Reversible action
* 5/8" bolt capacity
* 1/2" square socket drive
* 1/4'' NPT air inlet

dewat charger (windros) $20

2008-11-11T18:19:41-05:00

7.2-18v charger good condition

black decker saw 18v (windsor) $15

2008-11-11T18:02:28-05:00

is new 18v saw use 5-3/8 blades saw only it has no battery,charger

Kero salamander heater (wrightsville) $175

2008-11-11T16:15:50-05:00

150,000 BTU salamander heater. Can use ether kerosene or fuel oil. I only used kero. Will heat a big area. Works great. plugs into regular electrical outlet. $175.00 or best offer.

6000 Watt Craftsman Generator (Fairfield/Gettysburg) $850

2008-11-11T14:51:27-05:00

6000 watt Craftsman Portable Gas Generator. Under 10 hours operation! Will power all household appliances during outages! Heat, refrigerator, pump, stove, lights, microwave, etc. Also would be an excellent Job-site generator or power source for your deer camp! Call 717-337-1723 & leave message please!

Craftsman table saw (spring grove) $250

2008-11-11T11:41:55-05:00

i have for sale 1 craftsman table saw with a couple extra blades and a sanding blade. im lookng for 250 obo

i also have a scroll saw also avail im looking for $125 obo fot that one

both work great make an ofer to take both or will sell seperate
call to come take a look 495-1848

Heavy Duty 4" Table Vise with Swivel Base (York) $30

2008-11-11T11:09:11-05:00

$30 or will trade for a Router or Palm Sander

Thanx
Rob
577 8965

HOSFELD #1 bender with cabinet & dies (York) $650

2008-11-11T10:39:33-05:00

Hosfeld #1 bender in very good condition ..Most dies look likethey ere never used .. Bender is a little dirty but very good condition ( no wear ) .. $650.00 717-792-9282 also 8 ft. 16 ga. brake for $1400.00 & a jet 4 ft. box brake for $550.00 & more

Square "D" Magnetic Starters, Push Buttons, Breakers (Newberrytown)

2008-11-11T01:07:20-05:00

Retired Industrial Electrician has a selection of Square "D" Magnetic Starters, ( mostly NEMA #1 & #2 ) and 1, 2 or 3 pole "QO" Circuit Breakers.

Allen-Bradley Push Buttons, Illuminated Push Buttons, "Emergency Stop" Buttons, Selector Switches, Limit Switches, Pilot Lights etc.

Some NIB, but most are used.

Used components are generally priced at 1/3 the cost of new.

NIB items are priced at 2/3 of new.

If you need to make a machine run, I can help.

If you need a little advice on how to wire it up, ... that's no problem.

HEAVY SCRAP STEEL WORTH $300 (HANOVER) $100

2008-11-10T22:26:00-05:00

I HAVE 3 HEAVY STEEL ITEMS THAT IF YOU WANT TO TAKE TO THE SCRAP YARD YOU'LL GET ROUGHLY 300 BUCKS. TOO HEAVY FOR ME TO MOVE SO BRING EQUIPMENT TO MOVE IT. 1ST ITEM IS A BIG TANK, OTHER IS A 5 BY 5 FOOT PIECE OF STEEL AND THE LAST ONE IS AN INDUSTRIAL A/C UNIT. SWING BY AND GET THEM AND TAKE THEM TO THE SCRAP AND GET PAID. CALL ME AT 410-598-0291

Gould Pushmatic 100 Amp Breaker Panel (York) $60

2008-11-10T22:10:21-05:00

Pushmatic breaker panel with many breakers.
100,60,40,30,20,15 amp breakers.

HOBART WELDER ON TRAILER (HANOVER) $600

2008-11-10T22:00:04-05:00

HOBART WELDER ON TRAILER FOR SALE. HAS A CHRYLSER INDUSTRIAL ENGINE. NEEDS A NEW TIRE. TURNS OVER BUT BATTERY NOT STRONG ENOUGH. MAKE OFFER....410-598-0291

DeWalt Drill Case (Windsor) $20

2008-11-10T19:36:07-05:00

Case for a model DC926KA 18volt, 1/2" DeWalt hammer drill. Picture available if needed.

TROY-BILT 5500 GENERATOR (NEW OXFORD) $400

2008-11-10T17:54:00-05:00

Portable troy-bilt 5500 watt generator. 20 amp- 120, 30 amp-240. Plus 25' generator adaptor cord and manual. Used very little. please email me to see.

Craftsman air compressor (Etters) $165

2008-11-10T16:40:39-05:00

30 gallon 6 hp 120 volt single stage upright compressor on wheels specs as listed on tag-8.6scfm@40psi 6.4scfm @ 90psi 11.9cfm/135psi max. comes with 25 feet of hose with quick connect.Used very little I need the space this unit was $300.00 new so my price is firm.You can hear it run and check it out.Delivery available within a reasonable distance.Cash only please call 717 319-6557 or e-mail.

Wanted: Metal lathe (Red Lion)

2008-11-10T16:28:57-05:00

Wanted: Good used metal lathe. Would like one with 6" swing over the bed and a fairly long table; would be nice to find one that is about 36"-42" center-to-center. I will pick-up. I used to use an old craftsman (atlas) that fit my above description and I would love to find one like it. call 717-578-9082

Tools for sale (york)

2008-11-10T15:12:13-05:00

Combination plasma, tig, and arc welder....used once, new condition, 230 volt, 100 amp,works great 400.00 Ryobi 10" table saw, and compound mitre saw, both in good working order 50.00 each or 80 for the pair. 12 speed floor model drill press, good condition, 75.00, hand held band saw...30.00, other items as well, email for pics and details. all prices are negotiable, I must sell as I am leaving area soon.

Craftsman 2500 w portable generator (New Cumberland) $220

2008-11-10T14:18:01-05:00

Craftsman portable generator 2500 watt with Honda 5 hp ohc engine. Very low hours. Call 717-350-0715

for sale belt sander (hanover,pa.) $30

2008-11-10T13:59:36-05:00

craftsman three inch belt sander, good condition,model no.315.11721,have owners manual.asking $30 phone 717-637-8123

for sale:belt and disc sander (hanover,pa.) $50

2008-11-10T13:53:57-05:00

craftsman belt and disc sander, good condition,model no.113.226424,have owners manual,phone 717-637-8123

for sale Drill press (hanover,pa.) $45

2008-11-10T13:47:59-05:00

Bench top drill press,good condition,made by task force,have instruction manual,asking $45.phone 717-637-8123.

Torin 2 ton engine hoist 150 obo (spring grove) $150

2008-11-10T12:43:29-05:00

I have a baisically new 2 ton engine hoist. I used twice once to take an engine out and then again to put a new engine in. I don't need it anymore. With any questions email me ay waterboy222@aol.com or call me at 717 683 2389. price is negotiable

DREMEL MULTIPRO CORDLESS DRILL 770-2 SPEED W/ACC $30

2008-11-10T10:55:52-05:00

A VERY NICE CLEAN USED DRILL WITH CASE. CASE CONTAINS: 770 7.2 VOLT 2 SPEED TYPE I DRILL, ONE BATTERY, CHARGER, ASSORTED ACCESSORIES, ALL ARE IN GOOD CLEAN WORKING ORDERED,USED ABOUT 3 TIMES

PU CAN BE MADE IN THE HANOVER AREA IF NEEDED DURING THE DAY OR IN LEADER HEIGHTS AREA IN THE EVENING AND WEEKENDS

BEN PEARSON "MUFFLER SHOP" PIPE BENDER (STRINESTOWN,PA) $3500

2008-11-10T09:34:06-05:00

This is an excellent Ben Pearson "MUFFLER SHOP" pipe bender--220v single phase--On roller cart--Plug in,or can be hard wired--Has all dies & related tools including BENDING DEGREE CARDS,rotational dial,expander--Bends 1 1/2" to 2 1/2 " pipe--No hyd. leaks--Very good condition--Ready to go to work--
Any questions or need more/better pictures,please call
Thanks JIM
717-266-4363

Craftsman Table Saws (Red Lion/York) $200

2008-11-10T06:47:31-05:00

10-in Band saw 1/3 hp /extra blades
8" Table top saw direct drive
18" Scroll saw /extra blades
2 saw tables
Hand held Router
Glue gun with sticks
Drill stand

Pelonis Oilfilled Heater (leaders heights) $50

2008-11-09T19:37:59-05:00

this is a pretty new oilfilled electric heater works well can plug in on the spot n start heating. come and try it n make an offer april 741-4935 i can email some pics

DEWALT NEW and CHEAP (seven valleys)

2008-11-09T18:38:13-05:00

dewalt 18 volt batteries and chargers
nicd and lithium ion
will trade also make offer
call Jason at 717-887-0514

Lapidary grinder (Winterstown) $50

2008-11-09T18:29:18-05:00

6 Wheel lapidary wet grinder. Polish gem stones and sharpen tools. Runs free, Motor and steel frame bench with plywood top included.

Delta 12 1/2 in portable planer (bainbridge) $150

2008-11-09T15:59:52-05:00

for sale is a like new Delta 12 1/2 in portable planer.It has only been used a handful of times and looks like it to.its works great and comes with all the booklets that came with it new. im asking 150 obo.please reply with a name and number and thanks for looking.

kerosene heater torpedo style 150,000 BTU (red lion) $125

2008-11-09T15:30:55-05:00

remington brand 150,000 btu heater, plugs into a reg outlet,burns kerosene or heating oil, works fine, will heat a decent sized area,i cleaned the tank and filters on this one,ready to use. i'll be glad to plug this in so you can see it run,call me with any questions, or reply through c-list. thanks ron 246-3713

Foldable Work Benches $25

2008-11-09T11:08:53-05:00

2 Central Machinery foldable work benches. $25 for both obo.

Lot of misc. tools and metal tool box (Hanover) $100

2008-11-09T08:42:49-05:00

Asking 100 or best offer...

Please be patient as I check my email every few days but as soon as these are gone I will delete this ad.

Oil Extractor (Red Lion) $40

2008-11-08T23:16:48-05:00

6.5 Liter (~ 7 Quart) Hand Powered, Oil Extractor.
Brand New In Box.
Great for changing oil without crawling under car.
Extractor tube threads down dipstick tube, you pump, oil collects in container.